Tilt Steering Columns

73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED

73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED
73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED

73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED    73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED

Column will work in both 2wd and 4wd trucks. Only difference is that if going into a 4wd you will need the 4x4 intermediate shaft in order to hook up. Column is also a direct fit/ bolt-in for 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 year models. In these years the neutral safety switch would need to be addressed and on'67-72 models the harness connector would have to be swapped out.

Column has been totally taken apart (see 2nd pic), cleaned, sanded to bare metal, etch primed, sanded with 400 grit, and painted with a quality black satin lacquer paint. Plastic top cover was polished with a buffer. Tilt is super tight with no play or slop.

The retaining bolts that draw the tilt tight were coated with thread locker and will not be coming loose. Light works in the PRNDL cover. Bearings have been cleaned and re-packed with new grease.

Steel balls were in excellent condition so no need to replace. They are super smooth and turn like silk. Column has wire for cruise control option.

Dash mount cover also included (not shown but included). Dash cover is unique to the tilt columns. A regular cover will not work with this column. The'67-72 trucks have a 1 wire horn contact. This column uses a 2 wire contact which means that one of the wires would have to be grounded in order for the horn to work if going into these years.

This is a OEM factory column. Built rugged and sturdy, not like some of these aftermarket columns that can be bent over your knee. It will give many more years of dependable service.

Turn signal lever simply screws in, shift lever pushes down and in and is held in place with a rolled pin. Just line up the hole and tap it in. The pin hole on the collar is in excellent condition, not wallowed out like some are. Pin is tight when installed. The item "73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED" is in sale since Thursday, July 5, 2018.

This item is in the category "eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Interior\Steering Wheels & Horns". The seller is "cjmince" and is located in Clarksville, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.


73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED    73 79 67 72 FORD F100 F150 TRUCK BRONCO TILT with CRUISE STEERING COLUMN RESTORED